Rated 4.9 by South East QLD builders and homeowners
HydroForce seals bathrooms, showers, laundries and commercial wet areas across Brisbane and the Gold Coast. Licensed applicators, AS 3740 compliant systems, and a 7 year workmanship warranty on every job.
Most wet area failures are not a product problem. They come from rushed prep, thin coverage and unchecked details. Here is how the HydroForce approach differs.
Other operators
One thin pass over dusty substrate, then tiled the same day before the membrane has cured.
Corners, penetrations and floor to wall junctions skipped, which is exactly where leaks begin.
No flood test, no photo record and no certificate, leaving you exposed at handover or resale.
With HydroForce
Substrate prep, primer, bond breakers and two measured membrane coats at the correct wet film thickness.
Bandage tape to corners and hobs, collars to every penetration, and fall to waste checked before sign off.
24 hour flood test, stage photos and a signed compliance certificate with your 7 year warranty.
Residential renovations, new builds, unit blocks and commercial fitouts right across South East Queensland.
Complete wet area membrane systems for renovations and new builds, covering floors, hobs, walls and every penetration.
Read more
Step down and hobless showers sealed with reinforced corners, correct falls to waste and a full flood test before tiling.
Read more
Internal laundries protected against burst hoses and overflow, including tub bays, machine bays and floor wastes.
Read more
Balconies, planter boxes, plant rooms, amenities and podium decks for builders, body corporates and facility managers.
Read moreClear scope, clean sites and documentation that stands up to inspection.
Written, signed and transferable to a new owner, backed by full public liability cover.
Every wet area certified to AS 3740, with paperwork emailed the same day we finish.
Most single bathrooms are primed, membraned and flood tested inside three days so your trades keep moving.
A line by line scope priced on site, with no variations invented once the job starts.
CodeMark certified products rated for Queensland heat, humidity and coastal exposure.
Existing wet area failing? We trace the source and re-seal without a full demolition wherever possible.
Queensland wet areas have to meet AS 3740 and the National Construction Code. Our applicators are licensed through the QBCC and every job is set out to satisfy a private certifier on the first inspection.
Waterproofing of domestic wet areas, applied exactly as specified.
External above ground membranes for balconies and podium decks.
Fully licensed waterproofing contractors operating across Queensland.
Certified membrane systems installed strictly to manufacturer specification.
We measure the wet area, check substrate condition, falls and drainage, then send a written fixed price scope within 24 hours. No guesswork over the phone and no surprise variations later.
Surfaces are ground back, vacuumed and primed. We install bond breakers, bandage every junction, collar the penetrations, then apply two measured membrane coats at full specified thickness.
A 24 hour flood test confirms the system holds. You receive stage photos, your AS 3740 compliance certificate and a signed 7 year warranty, ready for the tiler to start.
“HydroForce sealed 32 apartment bathrooms for us across two Gold Coast towers. Every flood test passed first go and the certificates landed before the tilers rolled in. That never happens.”
Our crews work right across South East Queensland, with regional projects considered on request.
A standard bathroom takes two visits over roughly three days. Day one is prep, priming, detailing and the first coat, day two is the second coat, then we flood test for 24 hours before releasing the area to your tiler.
Yes. Every completed wet area comes with an AS 3740 compliance certificate, a photo record of each stage and your signed 7 year workmanship warranty, all emailed on the day of completion.
Often, yes. We inspect first to work out whether the failure is at the grout, the silicone, the waste or the membrane itself. Where the membrane is intact we can seal from above with minimal demolition. If the membrane has failed we will tell you straight and quote a rebuild.
Regularly. We run multi unit programs for residential builders, strata managers and commercial fitout contractors, including staged scheduling, site inductions and consolidated progress reporting across a whole block.
All of Brisbane and the Gold Coast, plus Ipswich, Logan, Redlands, Moreton Bay, the Sunshine Coast and Toowoomba. Projects outside these areas are considered case by case, so please ask.
Pricing depends on the wet area size, substrate type, number of penetrations and access. Our services page lists indicative ranges, and we confirm a fixed written quote within 24 hours of the site inspection.
Call HydroForce and speak to a licensed applicator today, or request a time slot online and we will confirm your site inspection the same business day.
